User`s manual

Overview
225
Label Prefix
(From page 181.) This item allows you to select the prefix for the format
instructions command.
The range is 1-255, and the factory default is 94.
LAC Approx.
(From page 161.) This item controls whether or not the LAC Approximation is
used. (See the
Coax/Twinax Programmer’s Reference Manual .)
When set to On, then Approximation is used. When set to Off, Approximation
is not used, and incoming data will print as is. The factory default is On.
LAC Option
(From page 161.) Allows the host system to load alternate character images
into the printer. This may be used for designing graphics, bar codes, and
charts, or for printing in foreign languages.
• Enable. Prints the LAC character as defined.
• Disable. Ignores the LAC definition from the host and prints from the
currently selected character set.
The factory default is Enable.
Last Char = FF
(From page 159, page 170.) Determines the print line position when a Form
Feed (FF) command is the last code encountered in the print buffer.
• On. Moves to the first print position on the second line of the next form.
• Off. Moves to the first print position on the first line of the next form.
NOTE: This option is ignored if Auto Skip At End is on.
If configured as a 3287, and a form feed occurs in the middle of a print buffer,
the printer defaults to the first print position on the second line of the next
form, regardless of the setting of this option.
The factory default is On.
Lead PDF Dist
(From page 177.) Adjusts the leading and trailing character spacing distance
of the PDF for UPC/EAN barcodes.
The range is 0.01- 0.10 inches in 0.01 inch increments, and the factory default
is 0.10 inches.