User`s manual

94
Chapter 3 MEDIA CONTROL
MEDIA CONTROL
MEDIA CONTROL
Print Intensity
6ips* 2-10 ips
(1)
Continuous* Tear-Off Strip Tear-Off Peel-Off Cut
Foot FirstHead First*
Print Speed
Print Mode
Media Handling
Paper Feed Shift
Label Width
Label Length
Ver Image Shift
Hor Image Shift
Orientation
Auto Map Select
Auto Label Width
Num Auto Labels
Slew Speed
Print Direction
Transfer* Direct
Disable* Enable
4.1, 6.6, or 8.5 inches*
(2)(3)
Portrait* Landscape Inv. Portrait Inv. Landscape
6ips*
(2)
2-10 ips
2 labels* 1-40 labels
(3)
00.1 to 8.5 inches
(3)
4.1, 6.6, or 8.5 inches*
(2)(3)
1-60 seconds
Tear-Strip Time
1 seconds*
Continuedatthetopofnextpage
-3* -15to15
Notes:
* = Factory Default
Italicized items are available when you enable
Advanced User (in the PRINTER CONTROL
menu).
1
Maximum value depends on the width of the
printer model and printhead.
2
You can change the unit value from inches to
millimeters under Units (in MEDIA CONTROL)
when Advanced User is enabled.
3
Maximum value depends on the width of the
printer model (see Appendix A, “Specifications”).
4
Maximum value depends on model width and
size of DRAM installed (see Appendix A,
“Specifications”).
5
Current value setting for Label Length (submenu
in MEDIA CONTROL Menu) up to a maximum of
12.80 inches.
0.00 inches*
(2)
-1.00to1.00inches0.00 inches*
(2)
-1.00 to X inches
(5)
00.1 to 8.5 inches
(3)
0.00 inches*
(2)
4 or 6 inches*
(2)(3)
00.1 to 99.0 inches
(4)
-0.50 to X inches
(5)