User`s manual

Chapter 3 Overview

• Ver Image Shift

• Hor Image Shift

• Orientation

3. When the desired submenu displays, press the

+ or-keytoscroll

through the values or options.

4. Press the ↵ key to select a value. An asterisk (*) displays next to the

selected value or option.

5. If there are more submenu values or options you want to change, use the

,↑, ↓, +, and − keys to access the value and the ↵ key to select it. At

any time, you may press the key to return to the main menu.

6. At any time, you may press the PAUSE key twice to exit the configuration

menu and place the printer online. Once you have finished selecting all

your options, save your configuration.

IMPORTANT

If you do not save your configuration, all your new values will be lost

when you power off the printer.

Saving A Configuration

You can save up to eight different configurations to meet eight unique print job

requirements.

The configurations are saved and stored in the printer and are not lost when

the printer is turned off.

NOTE: If the Protect Configs. option is enabled, the new configuration will not

be saved until the existing configuration is deleted.

Follow these steps to save a new configuration:

1. Press the key until the following message displays:

2. Press the ↓ key until the following message displays:

3. Press the

- or + key to cycle through the options (1-8). Note that the

factory default configuration is not listed.

4. When the desired number displays, press the ↵ key to select it. The

following message displays briefly:

MENU MODE

CONFIG. CONTROL

Save Config.

Saving

Configuration