User`s manual

Selecting A Menu Option

To select an option, you need to press the ↵ key. By default, however, the

↵ key is “locked” when the printer is turned on to prevent accidental changes

to the configuration menu. If you press the ↵ key when the key is locked, the

message “ENTER SWITCH LOCKED” displays on the LCD for one second,

and the value will not be selected.

To unlock the ↵ key, press the ↓ and ↵ keys simultaneously. This toggles the

enter lock function.

• If this function is performed while the ↵ key is locked, the message

“ENTER SWITCH UNLOCKED” displays for one second, and the ENTER

key will be unlocked.

• If this function is performed while the ↵ key is unlocked, the message

“ENTER SWITCH LOCKED” displays for one second, and the ↵ key will

be locked.

When you press the ↵ key (with the ↵ key unlocked), you select the value or

option that displays. An asterisk displays after the value you selected, and the

configuration is changed immediately.

IMPORTANT

This change takes effect for all subsequent data and operations for the

printer as soon as the ↵ (ENTER) key is pressed and the asterisk (*) is

displayed. The configuration change(s), stay in effect only while the

printer is powered on. When the power is turned off, all current

configurations will be lost unless changes made to it are saved via the

CONFIG. CONTROL menu.

To save configuration information permanently or to select it as the power-up

default, see “Saving A Configuration” on page 72.

Changing Printer Settings

You can change (or “configure”) printer settings, such as print speed or

emulations, through the control panel as follows:

1. Press the key until the following message displays.

2. Press the ↓ key to cycle through these options:

• Print Intensity

• Print Speed

• Print Mode

• Media Handling

• Paper Feed Shift

• Label Length

• Label Width

MENU MODE

MEDIA CONTROL