User`s manual

70
Chapter 3 Overview
Moving Within The Configuration Menu
You can move through the configuration menus using the appropriate
navigation keys, as shown in Figure 2. (See “Controls And Indicators” on
page 29 for more details on the function of the operator panel keys.)
You can select different options and save them as the power on default;
however, you can only save them to configuration menus 1-8. The factory
configuration menu can be altered, but not saved.
When the printer is online, the first line of the LCD displays “ONLINE” and the
second line lists the active interface port and type of emulation.
To configure the printer:
1. Press the key to enter the printer configuration menu system.
“MENU MODE/VALIDATOR” displays on the LCD.
2. You can move through configuration main menus in two ways:
• Press the key to move to the right
• Press the + key to move right or the - key to move left
Figure 2. Moving within the Configuration Menu
.
.
.
.
.
.
Step Press LCD Notes
1 OFFLINE
2
↓& ↵
ENTER SWITCH
UNLOCKED
Allows you to make
configuration
changes.
3MENUMODE
VALIDATOR
Enables the printer
configuration menu.
4MENUMODE
MEDIA CONTROL
Selects the MEDIA
CONTROL main
menu.
5
↓ UNTIL
Print Mode
Transfer*
6
+ or –
Print Mode
Direct
Cycles through the
choices.
7
↵
Print Mode
Direct*
Selects the Direct
transfer mode.
.
.
.
.
.
.