User`s manual

Host Interfaces
273
Host Interfaces
Power
Table 22. Host Interface Characteristics
1. Serial RS-232 or RS-422 at 600, 1200, 2400, 4800, 9600, 19200,
38400, 57600, or 115200 baud.
2. Parallel (Centronics compatible) or IEEE 1284 bi-directional.
The RS-232 and RS-422 host interfaces shall have the following
characteristics:
Character Set:
ANSI
®
ASCII character set
Word Length: Selectable 7-bit or 8-bit data format
Handshaking: XON/XOFF (in receive mode only) and
CTS/DTR
Input Buffer: Selectable from 1k through 16 kbytes. XOFF is
transmitted and DTR goes low when buffer is
equal to or less than 25% of full. XON is
transmitted and DTR goes high when buffer is
25% above empty. Characters are transmitted
with no parity from the printer
Table 23. Power Source and Grounding
Power Source: 115 or 230 VAC 50/60Hz switching power
supply.
Grounding: Unit must be connected to a properly
grounded receptacle.
Table 24. Power Consumption
4” printers 6” printers 8” printers
203 dpi
10 ips
300 dpi
8ips
203 dpi
10 ips
300 dpi
8ips
203 dpi
8ips
300 dpi
6ips
Energy Star
(Power Saver Mode) 24 Watts 24 Watts 24 Watts 24 Watts 24 Watts 24 Watts
Standby 50 Watts 50 Watts 50 Watts 50 Watts 50 Watts 50 Watts
25% Print Density 142 Watts 143 Watts 205 Watts 175 Watts 213 Watts 212 Watts
50% Print Density 234 Watts 235 Watts 360 Watts 300 Watts 375 Watts 373 Watts