User`s manual

202
Chapter 3 DIAGNOSTICS
Software Build
The reference number, which includes the program file part number and
revision number, of the software installed in the printer, e.g., 358186 V1.07G.
Hex Dump Mode
• Disable.
• Enable. The printer prints out data sent from the host in hexadecimal
format.
Also see page 176.
The factory default is Disable.
Print Error Log
Prints the current log of errors. Most non-routine faults (RIBBON FAULT,
PRINT HEAD HOT) are stored in the error log.
Clear Error Log
Clears entries in the error log.
DRAM Installed
Displays the amount of DRAM installed.
Ptr On Time
Displays the cumulative time in hours the printer has been powered on.
This value is set to zero at the factory after burn-in testing.
Ptr Media Dist
Displays the cumulative number of inches the printer has moved media.
This value is set to zero at the factory after burn-in testing.
Head Print Dist
Displays the length of media actually printed since the last Reset Head Data
operation. This value is set to zero at the factory after burn-in testing.
Head On Time
Displays the time that power has been applied to the printhead since the last
Reset Head Data operation. This value is set to zero at the factory after burn-
in testing.