User`s manual

198
Chapter 3 Emulation Submenus
Although the range allows a selection of up to 400 DPI, the thermal printer is
capable of printing up to 203 (T5204, T5206, T5208) and 300 (T5304, T5306,
T5308) DPI vertical resolution.
The range is 72-400 DPI, and the factory default is 72 DPI.
VPA Check
(From page 136.)
• Enable. The printer checks for dots that fall outside the intersection of the
logical and physical pages. If dots fall outside the area, the printer reports
and error to the host if the IPDS Exception Handling Control command
setting requires error reporting.
• Disable. The printer does not report dots outside the valid printable area.
The factory default is Enable.
Width Limit
(From page 143.) When enabled, the system will limit the length and width for
expanded characters to a limit shown in Table 5, which shows the maximum
width allowed for a specific height in the range of 00 through 40 (0.0 through
4.0 inches).
The factory default is Disable.
Table 5. Width Limit Table
Height
Param.
Max. Width
Allowed
Height
Param.
Max. Width
Allowed
00 99 21 51
01 99 22 53
0232356
0362458
0482561
05 11 26 63
06 13 27 66
07 16 28 68
08 18 29 71
09 21 30 73
10 23 31 76
11 26 32 78
12 28 33 81
13 31 34 83