User`s manual

194
Chapter 3 Emulation Submenus
Text Position
(From page 147, page 149, page 151, page 153, page 155.)
Specifies where the text will be positioned in the line space.
• Top of Line. Text is positioned at the top of the line space.
• Bottom of Line.Textispositionedasifitwereatthebottomofa6lpiline
space. The following example shows both Top of Line and Bottom of Line
text positions:
The factory default is Bottom of Line.
Top Margin
(From page 146, page 148, page 150, page 152, page 154.)
Defined in linespaces, starting from line zero at the top of the page and
incrementing from the top down.
The range is 0-451 linespaces, and the factory default is 0 linespaces.
Translate Table
(From page 129.)
• Default. The option is disabled. The table is not stored in the real
translation table until the option is enabled.
• Downloaded. The option is enabled. The LU3 Translation Table is
loaded from the buffer into the permanent table.
The factory default is Default.
Translation Tbl (Coax)
(From page 128.) Prints out SCS and DSC/DSE tables of the coax interface's
current character set. This operation is valid only when the coax interface is
selected as the current interface.
TopofLineSpace
Dot
Row
Bottomof8LPILineSpace
Bottomof6LPILineSpace
Text Position
Top of Line
Text Position
Bottom of Line