User`s manual

104

Chapter 3 MEDIA CONTROL

Num Auto Labels

The desired number of labels to be printed vertically adjacent on the form.

The value is selectable with a range of 1 through 40 (T5X04), 1 through 21

(T5X06) and 1 through 17 (T5X08).

The factory default is 2.

Slew Speed

This option selects the speed at which media will be advanced after the

printer determines there is no more data to be printed on a label.

The range is 2-10 ips, and the factory default is 6 ips.

Print Direction

This option determines the basic print image orientation.

NOTE: Print Direction will not change the orientation of any print test patterns

in the DIAGNOSTIC Main Menu.

Print Direction has two options:

• Head First

• Foot First

For example, with Portrait orientation, when you select Head First, the top-of-

form will come out of the printer first. Conversely, when you select Foot First,

the bottom-of-form will come out first.

The Print Direction and Orientation are two independent options that can be

combined to produce the following results depending on the Active IGP

Emulation:

Table 3. Head First

Print Direction

Option

Orientation Option

Result in Active IGP Emulations

(IGP/PGL or IGP/VGL)

Head First Portrait Portrait

Head First Landscape Landscape

Head First

FEED

Foot First