Instruction Manual

22
Chapter 2 The IPDS Emulation
Begin Page (BP)
Byte D6AF Flag CID Data
Count
This command indicates the beginning of a page and causes the printer to
enter the page state.
End
Byte D65D Flag CID Binary Data
Count
This command notes the end of a block containing: an image, graphics, or bar
codes.
End Page (EP)
Byte D6BF Flag CID Binary Data
Count
This command notes the end of a page, a page segment, or an overlay and
returns the printer to the home state.
Load Copy Control (LCC)
Byte D69F Flag CID Data
Count
This command is effective only in the home state and controls the number of
times you want to print the current logical page.
Load Font Equivalence (LFE)
Byte D63F Flag CID Data
Count
This command is used to re-identify local font data IDs to host specified font
resource IDs.
Load Page Descriptor (LPD)
Byte D6CF Flag CID Data
Count
The LPD command sets the logical page's characteristics, such as the units
for positioning text, the margins, and line spacing, etc.
Load Page Position (LPP)
Byte D66D Flag CID Data
Count
The LPP command sets the position of the logical page on the physical page,
which allows for any required offsetting.