Specifications

250
Appendix B Using the Full Media Rewinder with 3 Inch Diameter Core Adapters
Figure 19. Securing Media on the Media Take-Up Core
4. Wrap the leading edge of the media around the media take-up core.
See Figure 19.
5. Slide the media flush against the left edge of the rewinder flange.
6. Tape the leading edge of the media onto the media take-up core.
7. Manually rotate the media take-up core one full revolution until the media
is taut. See
Figure 20.
Figure 20. Tightening the Media on the Media Take-Up Core
p
g
r
w
l
o
d
7
Media
Media
Take-Up
Core
Tape
Rewinder
Flange
pgrwlod8
Media
Take-Up
Core