Specifications

Fault Messages
203
FILE SYS FULL
File Too Big
Yes/No Insufficient flash
memory available to
store file.
Delete unncessary files and
select the Optimze&Reboot
menu option. Check the
Flash Avail menu option to
determine if there is enough
flash to store the file you
wish to save. Files too large
for onboard flash may be
saved on the (optional)
Extended Memory Cartridge
(EMC).
FILE SYS FULL
Optimize & Reboot
Yes Insufficient flash
memory available to
store file.
Enter the PRINTER SETUP
menu and use the Optimize
& Reboot feature.
FILE SYS FULL
Delete Files
Yes Insufficient flash
memory available to
store the file.
Delete unnecessary files and
select the Optimize &
Reboot menu option. Check
the Flash Avail menu option
to determine if there is
enough flash.
FILE SYS WRITE
Check Flash
Yes/No Problem writing to flash
memory.
Power off the printer for 15
seconds, then power back
on. If the problem persists,
contact your authorized
customer service
representative.
EXT FILESYS FULL
File Too Big
Yes/No Insufficient flash
memory on the
Extended Memory
Cartridge (EMC) is
available to store file.
Delete unnecessary files
from the Extended Memory
Cartridge (EMC) and select
the Optimize & Reboot menu
option.
EXT FILESYS FULL
Optimize & Reboot
Yes Insufficient flash
memory on the
Extended Memory
Cartridge (EMC) is
available to store file.
Enter the PRINTER SETUP
menu and use the Optimize
& Reboot feature.
EXT FILESYS FULL
Delete Files
Yes/No Insufficient flash
memory on the
Extended Memory
Cartridge (EMC) is
available to store file.
Delete unnecessary files
from the Extended Memory
Cartridge (EMC) and select
the Optimize & Reboot menu
option.
Table 15. Fault Messages
Displayed Message
Can User
Correct?
Explanation Solution