Owner's manual

Actions
231
Single Label Printing,
Enable
1
Action enables single label
printing.
None
9
Single Page Printing,
Enable
2
Action enables single page
printing.
None
9
Single Label Printing,
Disable
1
Action disables single page
printing.
None
9
Single Page Printing,
Disable
2
Action disables single page
printing.
None
9
RFID: Program Next
Label
1
Action puts the printer in
continuous page printing mode.
None
9
Sensor Action Action turns the media sensor on
or off.
Sensor, Action Ignore
On/Off
9
Power Save Action Action turns power saving on or off
and enters or exits power save
mode.
On, Off, Enter, Exit
9
Manual Overstrike Action performs a manual
overstrike.
None
9
Panel Control
Lock Panel This action disables all the buttons
on the operator panel.
None
Unlock Panel This action enables the buttons on
the operator panel.
None
Key Handling This action is only enabled if the
selected event is Panel Key.
Consume
9
Beep This action defines the number of
times the buzzer beeps.
Beep Count
9
Blink This action changes the state of a
printer’s led or lamp.
State, LED/Lamp
9
General
Disable GPIO Events This action prohibits the Event
Parser from executing any actions
except for the Enable Event
Parser action. This allows an
application to temporary disable
the GPIO Event Parser.
None
Table 10. Event Actions and Parameters
Action Name Description Parameters
Security Key
Required