User`s guide

2-52
Guide to Printers and Printing
Using Remote Host Access for Printing
Prerequisites
• Your system must be configured to communicate as a remote print server.
• The lpd daemon must be installed on your system.
• To add a remote host, you must understand naming conventions for TCP/IP.
Listing All Remote Hosts
1. At the system prompt, type:
wsm printers
2. In the Print Queues container, select a computer object.
3. Select Properties from the Selected menu to view a list of remote print server hosts.
For detailed information or assistance, see the online help.
You can also perform this task with the following commands:
ruser –sPOR
smit lshostslpd
Adding a Remote Host
1. At the system prompt, type:
wsm printers
2. In the Web-based System Manager Print Queues container, select New queue and
printer from the Printers menu.
3. Use the menus or provide additional information as prompted to complete the steps for
adding a remote host.
For detailed information or assistance, see the online help.
You can also perform this task with the following commands:
ruser –a –p HostNameOR
smit mkhostslpd
Deleting a Remote Host
1. At the system prompt, type:
wsm printers
2. In the Web-based System Manager Print Queues container, select the host you want to
delete.
3. Use the menus or provide additional information as prompted to complete the steps for
deleting a remote host.
For detailed information or assistance, see the online help.
You can also perform this task with the following commands:
smit rmhostslpdOR
ruser –d –p HostName