User`s guide

5-14
Guide to Printers and Printing
Cleaning Up and Starting Over
This procedure completely clears and restarts the spooler system. All jobs currently queued
for processing are deleted and must be resubmitted. Use it when you cannot troubleshoot
an inoperative spooler. You must be the root user to perform this task.
1. Stop the qdaemon and associated processes:
stopsrc –s qdaemon
ps–ef | grep qd
2. kill –9 PIDNumbers
where PIDNumbers are PIDs resulting from the ps command. You may find qdfork.
ps –ef | grep pio
kill –9 PIDNumbers
where PIDNumbers are PIDs resulting from the ps command. You may find pioformat
or pioout.
3. Clean out the queue and device status directory.
rm /var/spool/lpd/stat/*_dev_*
rm /var/spool/lpd/stat/s*
The file /var/spool/lpd/stat/numfile contains an integer representing the last job number
that was assigned. If you don’t care if the job numbering scheme restarts, you can just
enter:
rm /var/spool/lpd/stat/*
4. Remove spooled jobs:
rm /var/spool/lpd/qdir/*
rm /var/spool/qdaemon/*
5. Restart the qdaemon.
startsrc –s qdaemon
While issuing the ps commands, you may find a process whose parent process ID (PPID) is
1. If these processes cannot be killed by kill –9, you must re–boot the system to get rid of
these processes.