User`s guide

4-110
Guide to Printers and Printing
Separator Pages The –E flag controls separator pages. The valid values are 0, 1, 2,
and 3, which represent NONE, BETWEENCOPIES,
BETWEENJOBS, and BETWEENPAGES, respectively. The
separator page source defaults to TRAY 1 and is specified via the uS
attribute. The valid values for uS are the same as for header and
trailer pages (uH and uT respectively), except that the Manual
Feeder is not supported. To change the default, the uS attribute must
be changed in the virtual printer to one of the valid values (see the
chvirprt command).
Output
Destination
The –= (equal sign) is the command line option for specifying the
output destination. Valid values are:
0 standard bin
1 bin 1
2 bin 2
3 bin 3
50 active bin
The default value for the output destination is the standard bin (0).
Note that if the active bin is selected, the printer will select the bin
based on the state of output bin capacity sensing and the op–panel
setting for ”Configure Bins” under the PAPER MENU. Please refer to
your printer manual to determine exactly how the printer will respond.