User`s guide

4-103
Printer, Plotter, and Spooler Subsystem Programming
Pitch
Pitch selection is supported for the PCL emulation by using the –p
flag for pitch and the –s flag for font name (or type face) with the qprt
command. Pitch values between 1 and 100 characters per inch (cpi)
in whole integers are supported. The condensed print flag, –K, is not
supported.
Font Name Pitch
–s courier –p (1 to 100)
–s courier–bold –p (1 to 100)
–s courier–italic
–p (1 to 100)
–s courier–bolditalic
–p (1 to 100)
–s gothic –p (1 to 100)
–s gothic–bold –p (1 to 100)
–s gothic–italic –p (1 to 100)
–s lineprinter –p 17
Note: To format ASCII for other font styles, use the AIX enscript
utility or the qprt command with the –da, –s, and –p flags to a
PostScript queue. For PostScript queues, –p stands for point
size and the valid list of fonts is located in /usr/lib/ps/fontmap.
Valid point sizes are any integer from 1 to 1008.
Only a pitch of 17 is supported for the lineprinter font style.
Number of
Copies for Each
Page
The –W flag of the qprt command controls how many copies of each
page is printed. The default is 1 copy, and the maximum value is
999.
–w # number of copies
Example: If a three–page job is submitted with –W2 on the qprt
command, then two copies of page 1 followed by two copies of
page 2 followed by two copies of page 3 will occur in that order.