User`s guide

4-100
Guide to Printers and Printing
Separator Pages
The Optra N printer supports internally generated separator pages.
This feature is controlled by the –E flag of the qprt command.
–E 0 None
–E 1 Between Copies
–E 2 Between Jobs
–E 3 Between Pages
The paper source defaults to tray 1. To change the default, the uS
attribute must be changed in the virtual printer. The valid values for
uS are:
uS 1 tray 1
uS 2 tray 2
uS 3 tray 3
uS 4 envelope feeder
uS 5 multipurpose tray
Note: This function is independent of the –B flag of the qprt
command.
Output Bin
The equal sign (=) is the command line option for specifying the
output destination. Valid values are:
0 printer top bin
1 finisher bin 1
2 finisher bin 2
3 finisher bin 3
50 printer side bin
The printer top bin or 0 is the default value for the output bin.
Note: If the printer side bin is selected and the finisher option is
installed, the output will go to the active bin.
Faceup or
Facedown
The –U option controls whether paper is output faceup or facedown
for the finisher.
Note: The printer top bin is always facedown. A value of + or true
indicates facedown and is the default. A value of ! or false
indicates faceup. If faceup is selected the staples (–y) and job
offset (–e) are ignored.