User`s guide

4-86
Guide to Printers and Printing
Lexmark Optra Color 40 Printer
Paper Source
Paper source selection is supported for both the PCL 5 emulation
and the PostScript Language by using the –u flag of the qprt
command.
–u 0 manual feed
–u 1 tray 1
Paper Size
Paper size selection is supported by using the qprt command flags,
–O and –Q. The –O flag controls paper versus envelope. A –O value
of 3 indicates a paper size and 4 an envelope size. The values 1 and
2 were skipped for backward compatibility. The first five paper sizes
are also numbered for backward compatibility. Whenever an invalid
value for the input source is selected, it will be ignored.
Note: Envelopes available from Manual and Tray 1
The default for –O is 3 or paper. The default for –Q is 1 or Letter for
paper sizes and Monarch for envelope sizes.
Paper Sizes (–0 3)
Envelope Sizes (–0 4)
–Q 1 Letter 7 3/4 Monarch
–Q 2 Legal 9 (Com 9)
–Q 3 B5 10 (Com 10)
–Q 4 A4 DL
–Q 5 Executive C5
–Q 6 A5 B5 Envelope
–Q 7 Universal Other Envelope
Note: The printer file (lexOptraC40.pcl) for PCL 5 defaults the
paper size to letter. To change the default size, change the values
for the s0–s3 attributes in the file respectively for the _u (paper
source) attributes. For example, to make legal the default size for
tray 2 change the s2 attribute value to 2.
Note: For PCL queues, if the selected size is not in the selected
input source, a search sequence will be used to find the size
requested. If the size is found that source will be used. For
PostScript queues, if the selected size is not in the selected input
source, the printer will prompt the user to load the source with the
appropriate size. This may result in an unexpected paper source
being used or an op–panel message that may not make sense at
first. Please refer to the manual to determine appropriate
responses.