User`s guide

4-83
Printer, Plotter, and Spooler Subsystem Programming
Collation
The Optra Plus printer supports collation of multiple copies of a print
job internally. This feature is controlled by the –W and –S flags of the
qprt command.
–S ! collation off
–S + collation on
–S # number of copies
Note: This function is independent of the –N flag of the qprt
command. The –N# flag will cause the printer job to be sent to the
printer # times. The –W# will send the print job once, and #
copies of the job will be printed.
Separator Pages
The Optra Plus printer supports internally generated separator
pages. This feature is controlled by the –E flag of the qprt command.
–E 0 None
–E Between Copies
–E 2 Between Jobs
–E 3 Between Pages
The paper source defaults to Feeder. To change the default, the uS
attribute must be changed in the virtual printer. The valid values for
uS are the same as the paper source flag –u except that manual
feed is not a valid source.
Note: This function is independent of the –B flag of the qprt
command.
Lexmark Optra Color 1200 Printer
Paper Source
Paper source selection is supported for both the PCL 5 emulation
and the PostScript Language by using the –u flag of the qprt
command.
–u 0 manual feed
–u 1 tray 1
–u 2 tray 2
–u 3 tray 3
–u 4 multipurpose feeder
By default the banner and trailer pages come from the tray 1. To
change the default, change the values for the uH and/or uT attributes
respectively in the colon file to the value for the desired paper
source. Valid values are the same as for the –u flag. Do this by
editing the virtual printer colon file by using the ”chvirprt” command.