User`s guide

4-82
Guide to Printers and Printing
Print Resolution
The Optra Plus printer supports print resolution of 300, 600, and
1200 dpi using the –q flag of the qprt command. The default is 600
dpi.
–q 300
–q 600
–q 1200
Pitch
Pitch selection is supported for the PCL 5 emulation by using the –p
flag for pitch and the –s flag for font name with the qprt command.
Pitch values between 1 and 100 characters per inch (cpi) in whole
integers are supported. The condensed print flag, –K, is not
supported.
Font Name Pitch
–s courier –p (1 to 100)
–scourier–bold –p (1 to 100)
–scourier–italic –p (1 to 100)
–scourier–bold italic
–p (1 to 100)
–sgothic –p (1 to 100)
–s gothic–bold –p (1 to 100)
–sgothic–italic –p (1 to 100)
–s lineprinter –p 17
Note: To format ASCII for other font styles, use the AIX enscript
utility or the qprt command with the –da, –s, and –p flags to a
PostScript queue. For postscript queues, –p stands for point size
and the valid list of fonts are located in /usr/lib/ps/fontmap. Valid
point sizes are any integer from 1 to 1008.
Also, only a pitch of 17 is supported for the lineprinter font style.
Duplex Mode
The optional duplex feature is supported by the –Y flag of the qprt
command.
–Y 0 simplex
–Y 1 duplex, long–edge binding
–Y 2 duplex, short–edge binding