User`s guide

4-73
Printer, Plotter, and Spooler Subsystem Programming
–Q #
Specifies the paper size for the print job.
1 Letter
2 Legal
3 Folio
4 11x17
5 A4
6 B4
7 A3
8 Universal Paper Size
9 BJ–JIS
10 A5
11 Executive
12 Statement
13 Hagaki
14 Monarch Envelope
15 COM10 Envelope
16 C5 Envelope
17 DL Envelope
18 Universal Envelope Size
Queue
Names
Valid queue names located on the IBM Network Printer 12, 17, 24, and
InfoPrint 20, 32, and 40 are as follows:
TEXT Data that requires line feed, carriage return processing
PASS Data that requires no further processing
Canon LASER SHOT LBP–B404PS/Lite
The Japanese PostScript and ASCII data streams are supported. Japanese language text
files cannot be printed.
Canon LASER SHOT LBP–B406S/D/E/G, A404/E, A304E
The Japanese code sets are supported. Do not use IBM 5575 emulation card. The lips3
queue cannot be used for models LBP–B406S/D,A404 with LIPS II+ mode.
Dataproducts LZR 2665 Laser Printer
The data stream (PostScript, Diablo 630) must be selected manually, using the control
panel. ASCII files can also be printed using the PostScript data stream.
Hewlett–Packard LaserJets II, III, IIISi, 4, 4Si, 4Plus, 4V, 4000, 5Si/5Si
MX, 5Si Mopier, 8000 Color, and 8500 Color
HP LaserJet printers can print on paper other than the default 8–1/2 by 11 inch size. The
paper size can be changed using SMIT as described in ”Specifying Paper Size Using
SMIT”, on page 2-39 . To change paper size for a single print job, specify the –Q flag with
the qprt command.