User Manual

IPDS Emulation
199
Graphics Quality
This parameter chooses the print quality of graphics.
• High (factory default). Graphics are printed at 144 dot rows per inch.
• Select By Host. The application decides the quality of the graphics.
• Low. Graphics are printed at 72 dot rows per inch.
Barcode Quality
This parameter chooses the horizontal print quality of barcode labels.
• High (factory default). Label is printed at 144 dots per inch.
• Select By Host. The application decides the quality of the labels.
• Low. Label is printed at 72 dots per inch.
Barcode Speed
This parameter chooses the vertical print quality of barcode labels.
• High (factory default). Barcodes are printed with less vertical dots,
increasing printing speed, but decreasing print quality.
• Select By Host. The application decides the quality of the labels.
• Low. Barcodes are printed with more vertical dots, decreasing printing
speed, but increasing print quality.
Barcode Size
This parameter will emulate the barcode sizes of the selected printer model.
• 4234 (factory default). IBM 4234
• 67XX. Decision Data 67XX
• 64XX. IBM 6400 series
• 4224. IBM 4224
Early Print Comp (Complete)
This parameter chooses when to send a Print Comp to the controller.
• Off (factory default). Print Comp is sent if page is printed completely.
• On. Print Comp is sent immediately. The next page will be created. This
improves the print performance when starting the next page.
NOTE: When Early Print Comp is enabled and an error occurs, you may lose
data.