User Manual

190
Chapter 4 EMULATION Menu
Midline PY (includes ^PN)
• Disable (factory default). The Graphics mode Enable command, ^PY,
must be the first three characters of a line.
• Enable. The ^PY or ^PN can occur anywhere in a line.
Print Quality
• Data Processing (factory default). ALPHA text and barcodes are printed
in normal mode at 60 x 72 dpi. This mode should be set if the highest
speed is desired.
• High. ALPHA text and barcodes are printed in dark mode at
120 x 72 dpi.
Expanded Font
• Scalable (factory default). These expanded characters have rounded
edges.
• Block. These are block characters compatible with IGP-X10 printers.
LP+ Font
• Disable (factory default). The IGP/VGL uses its default half-dot font,
which is slightly different from the standard bitmap font used by LP+ at 12,
13, 15 and 17 cpi.
• Enable. The IGP/VGL uses the same font as used by LP+ at all cpi.
MSI Check Digit
• Print (factory default). The check digit is appended at the end of the
printable data field for MSI barcodes.
• Don't Print. The check digit for MSI barcodes does not print.
I25 Selection
• I25 Odd Data (factory default). When an odd number of data is provided,
the default setting, Leading Zero, will add a zero to the beginning of the
bar code data. The setting, Check Digit, will add a check digit to the end
of the bar code data so that the results add up to an even number of data.
• Convert Alpha. Disable is the default. When enabled, each non-digit I25
bar code character will convert to “0.”
NOTE: If you use an Interleaved 2/5 barcode that automatically adds the
check digit (type code k or l, IBARC type code INT2/5CD or INT2/
5CDA), the check digit is added regardless of how this parameter is
set.