User Manual

LinePrinter Plus Emulation (H-Series Hangul)
135
KSSM Emulation
Character Sets
This parameter selects a character set for the KSSM emulation.
CR Bold Select
This option determines whether CR (0x0D) will turn on the bold attribute.
• Enable (factory default). The text after CR will be printed as bold together
with the text before CR.
• Disable. Normal CR function.
Define CR Code
The Define CR code option controls the action of the printer when it receives
a Carriage Return code (hex 0D) from the host computer. If this feature is
enabled, each time the printer receives a Carriage Return, it inserts an
additional Line Feed code (hex 0A) into the data stream. Do not use this
feature if the host computer sends Line Feeds to the printer.
• CR = CR (factory default). Does not insert an extra Line Feed after each
Carriage Return.
• CR = CR + LF. Inserts an extra Line Feed after each Carriage Return.
Define CR
Code
Autowrap Define LF
Code
Printer Select
CR = CR*
CR = CR + LF
With LF+CR*
With CR
Disable
LF = CR + LF*
LF = LF
Alt. Set 80-9F
Control Code*
Printable
Printer
Protocol
KSSM
(from page 132)
20 CPI
Condensed
Enable*
Disable
Disable*
Enable
Character
Sets
Standard Sets*
IBM PC*
Epson Set
CR Bold
Select
Enable*
Disable
KSSM Emulation