User guide

219
Width Limit
• Disable (default).
• Enable. The system will limit the length and width for expanded
characters to a limit shown in
Table 9, which displays the maximum width
allowed for a specific height in the range of 00 through 40 (0.0 through 4.0
inches).
Absorb After ^PN
• Disable (default). All line terminators that follow the ^PN command are
sent to the printer and processed.
• Enable. The first motion line terminator that follows the ^PN command is
ignored.
IGP110 Compatbl.
This option instructs the VGL to behave similarly to the IGP-10 with respect to
certain commands. All new users with new applications should select the
“Disable” option. Selecting this mode insures the printer will behave as
described in this manual.
• Disable (default). The IGP does not emulate the IGP-10 mode.
• Enable. The IGP emulates the IGP-10 version.
Table 9. Width Limit Table
Height Param.
Max. Width
Allowed
Height Param.
Max. Width
Allowed
00 99 21 51
01 99 22 53
02 3 23 56
03 6 24 58
04 8 25 61
05 11 26 63
06 13 27 66
07 16 28 68
08 18 29 71
09 21 30 73
10 23 31 76
11 26 32 78
12 28 33 81
13 31 34 83
14 33 35 86
15 36 36 88
16 38 37 91
17 41 38 93
18 43 39 96
19 46 40 98
20 48