User`s manual

Optimizing Print Quality
97
Optimizing Print Quality
LP+, IGP/PGL, and IGP/VGL Emulations
You can optimize print quality for darker and sharper barcodes and
characters. Doing so, however, will decrease the printer speed.
To optimize print quality, you can change the values of the following
configuration parameters:
• Bar Code Quality (Printer Control menu): Select “Dark” or
“Recommended.” Recommended prints the darkest images,
but at the slowest speed. Dark prints at a faster speed than
Recommended, but the characters are not as dark. (See page
99 for the Configuration Main Menu, and see page 243 for a
written description of Bar Code Quality.)
• Print Quality (IGP/PGL emulation): Select “Best” or “High.”
Best prints the darkest images, but at the slowest speed. High
prints at a faster speed than Best, but the characters are not as
dark. (See page 108 for the IGP/PGL Configuration Menu, and
see page 117 for a written description of Print Quality.)
• Print Quality (IGP/VGL emulation): Select “High.” (See page
122 for the IGP/VGL Configuration Menu, and see page 127 for
a written description of Print Quality.)
• Print Line Select (Printer Control menu): Select “Bar Code
Detect”, “Dual,” “Single,” (Upper or Lower), “Alt Print Line,” or
“Graphics Detect”.