User`s manual

Control Panel Keys
67
CANCEL
In offline mode, this key cancels all data in the print buffer, if
enabled in “MAINT / MISC” on page 209. The print buffer is cleared
without printing any of the data and the current paper position is set
as the top-of-form. If this function is disabled, the CANCEL key will
be ignored.
NOTE: Use of this key will cause loss of data.
SET TOF
Sets the top-of-form on the printer. This key is active only when the
printer is offline and will not operate if the printer is in a fault
condition. The paper moves down to the print position and aligns to
the top-of-form. See page 60 for the complete top-of-form setting
procedure.
NOTE: If there is any data in the buffer, the paper will move to the
last print position.
PRT CONFIG
In offline mode, PRT CONFIG prints the current printer
configuration. This key requires a confirmation with the ENTER
key; pressing any other key will exit from this function. See “The
Configuration Menus” on page 89 for an explanation of
configuration menus.
JOB SELECT
In offline mode, JOB SELECT allows you to change the active
configuration without having to navigate the configuration menu.
When pressed, the display reads “Load Config” and the name or
number of the currently loaded configuration. Press JOB SELECT
again until the configuration you want to load displays. Press
ENTER and “Loading Saved Configuration” displays. The selected
configuration is loaded into memory and becomes the active
configuration. Press ON LINE twice to return to online mode.