User`s manual
Table Of Contents
- 1 Introduction
- 2 Setting Up The Printer
- 3 Operating The Printer
- 4 The Configuration Menus
- 5 Interfaces
- 6 Troubleshooting
- A Printer Specifications
- B Demand Printing
- C ASCII Character Set
- D Communication Notices
291
Labels
On Backing: One-part continuous perforated fanfold back
form. Labels must be placed at least 1/6 inch
(0.42 cm) from the fan-fold perforation. Backing
adhesive must not be squeezed out during
printing.
Sheet Size: 3 to 17 inches (7.62 to 43.18 cm) wide,
including the two standard perforated tractor
feed strips. A maximum sheet length of 16
inches (40.64 cm) between top and bottom
perforations. Power Paper Stacker option is 5 to
12 inches (12.7 to 30.48 cm) long.
Thickness: Not to exceed 0.025 inch (0.064 cm) (including
backing sheet)