User`s manual

Fault Messages
281
08 HOLD PRINT
TIMEOUT
Yes Printer was offline
more than 10
minutes, and the
“Intervention
Required”
parameter is set to
“Send to Host.”
Press ON LINE to put
printer in online state.
HB NOT INSTALLD* No Self-test does not
detect hammer
coils.
Contact your authorized
service representative.
1
06 HOST REQUEST Yes Host attention
message.
The host computer or
printer controller requires
attention.
ILL EXT BUS ACC* No Fatal firmware
error on controller
board.
Contact your authorized
service representative.
1
ILLGL OPR ACCSS* No Fatal firmware
error on controller
board.
Contact your authorized
service representative.
1
ILL INST ACCSS* No Fatal firmware
error on controller
board.
Contact your authorized
service representative.
1
INTAKE FAN FAULT Yes Sensors cannot
detect current in
fan circuit.
See description for HMR
BANK FAN FLT.
INVALID ACTIVATE No Printer detects
twinax protocol
communication
errors.
The printer reports the
error.
Table 16. LCD Message Troubleshooting Table
Displayed Message
Can User
Correct?
Explanation Solution