User`s manual
Table Of Contents
- 1 Introduction
- 2 Setting Up The Printer
- 3 Operating The Printer
- 4 The Configuration Menus
- 5 Interfaces
- 6 Troubleshooting
- A Printer Specifications
- B Demand Printing
- C ASCII Character Set
- D Communication Notices
Epson FX Emulation
215
PTX Setup Option
Selects the Special Function Control Code for the PTX_SETUP
command and functions.
• Setup Parse. Disables or enables the PTX_SETUP command.
• Setup SFCC. Allows you to choose the hex value of the ASCII
character you wish to use as the SFCC for the PTX_SETUP
command. Valid hex values are 01-FF. The default value is hex
21, which corresponds to the “!” character.
Accented Chars.
Selects whether the accented characters are standard or tall. See
Figure 66 for an example. Selecting tall will slow print speed and
may cause the printer to back up during printing.
Figure 66. Accented Characters
Standard
Tall