User`s manual

SPC Twx Params
171
Margins
• Left Margin. Set in columns. Column zero is defined as the far
left edge of the page, and column numbering increments from
left to right.
• Right Margin. Set in columns. Column zero is defined as the
far right edge of the page, and column numbering increments
from right to left.
• Bottom Margin. Defined in lines, starting from line zero at the
bottom of the page and incrementing from the bottom up.
Perforation Skip
• Disable. Allows printing on page perforation.
• You may set up a skip-over margin of 1/2 inch, 2/3 inch,
5/6 inch, or 1 inch. For example, a skip-over margin of 1 inch
allows a 1 inch margin at the bottom of the page.
Print Char. Set
When this selection is displayed and the ENTER key is pressed,
the current character set is printed.
Reset Cmd CFG Ld
When the printer receives a host data stream reset command
(ESC @ or ESC[K) in addition to resetting printer variables, the
selected configuration is loaded.
• Disable. The active emulation parameters are loaded when the
reset command is executed.
• Power-Up Config. The power-up configuration is loaded when
the reset command is executed.
• Current Config. The currently selected configuration is loaded
when the reset command is executed.
• Factory Config. The factory installed configuration is loaded
when the reset command is executed.