User`s manual
Table Of Contents
- 1 Introduction
- 2 Setting Up The Printer
- 3 Operating The Printer
- 4 The Configuration Menus
- 5 Interfaces
- 6 Troubleshooting
- A Printer Specifications
- B Demand Printing
- C ASCII Character Set
- D Communication Notices
Chapter 4 IGP/PGL Emulation
116
Expanded Font
This option defines the type of expanded characters the PGL will
select:
• Scalable. These expanded characters have rounded edges.
• Block. These are block characters compatible with the
IGP-X00 printers.
• Alt Block 1 / Alt Block 2. Reserved block sets used only for
compatibility purposes.
Scalable Size
• Normal. Controls the size of scalable characters to be either
normal size (as set by the user) or adjusted to match the size of
block fonts. This is the default.
• Block. Adjusts the size of scalable characters to exactly match
its block font alternative.
True Form Slew
This option is related to slewing within forms when using the
PMODE command. Customers with new applications are advised
to keep this option enabled.
• Enable. Form length is accurate according to the form length
parameter in the CREATE command.
• Disable. Form length is IGP-X00 compatible when using
PMODE.
Printer PI Line
This option enables the IGP to send PI instructions to the printer to
slew the form.
• Enable. Send the PI instructions to the printer (LinePrinter
Plus) during form slew. This is IGP-X00 compatible.
• Disable. Do not send PI instructions to the printer. LFs are sent
instead.