User`s manual

IGP/PGL Submenu
111
Auto Uppercase
This parameter enables the printer to print text in all uppercase
when using the ALPHA command.
• Disable. The printer will print text in upper and lowercase.
• Enable. The printer will print text in uppercase only.
Skip Cmd Prefix
This parameter determines if the printer will print any data before a
PGL command is received.
• Enable. The printer ignores all data on the current line before
an IGP command.
• Disable. The printer will print all data on the current line before
an IGP command.
Power On IGP/PGL
You can set the IGP feature so that it is enabled or disabled when
the printer is powered on.
• Enable. The PGL is enabled when the printer is powered on.
(The PGL feature is initialized in the Normal mode.)
• Disable. The PGL is disabled when the printer is powered on.
(The PGL feature is initialized to the Quiet mode.)
Ext Execute Copy
• Disable. Dynamic data and overlay data are not allowed if the
optional Form Count parameter (number of forms to print) is
specified as part of the Execute command. (This setting is
IGP-100 compatible.)
• Enable. Only dynamic data is allowed within a form in which
the Form Count parameter is specified in the Execute
command. In this case, the exact same form (with identical
dynamic data, etc.) is printed for the Form Count. However,
incremental data is not incremented since the page that is
printing is exactly the same. Also, each form is printed on a
separate page.