Instruction manual

329

WARNING

The constant force spring is a high tension spring. To avoid pinching

your fingers, coil the spring slowly and carefully. Do not let the spring

twist or crimp.

3. Remove the shoulder screw, washers, and spacer from the constant force

spring and drum. Let the spring coil itself up until it reaches the screw that

secures it to the vertical rail. (See Figure 73.)

4. Firmly gripping the spring and drum, remove the screw securing the

spring to the vertical rail. (See Figure 73.)

Legend:

1. Rail Screw

2. Washer

3. Constant Force Spring

4. Large Washer

5. Spacer

6. Drum

7. Shoulder Screw

Figure 73. Removing the Constant Force Spring