Instruction manual

312
Appendix E Removing the Power Stacker
Removing the Power Stacker
1. Set the printer power switch to O (off).
2. Unplug the power cord.
3. Unload paper from the stacker area. (Refer to the
User’s Guide.)
4. Remove the paper tent. (See Figure 56.)
Legend:
1. Paper Tent
Figure 56. Removing the Paper Tent
5. Cut the tie wrap and remove the paper fence. (See Figure 57.)
Legend:
1. Paper Fence
2. Stacker Base
Figure 57. Removing the Paper Fence
1
1
2