Instruction manual

Chapter 2 Cleaning the Card Cage Fan Assembly

11. Install the shuttle cover assembly (page 160).

12. Clean the card cage fan assembly, as described in the next section.

Cleaning the Card Cage Fan Assembly

1. Cabinet Models: Remove the paper path (page 177).

Pedestal Models: Remove the top cover assembly (page 161).

2. Vacuum the card cage fan assembly and surrounding areas to remove

paper particles, dust, and lint. (See Figure 7.)

3. Cabinet Models: Install the paper path (page 177)

Pedestal Models: Install the top cover assembly (page 161).

4. Return the printer to normal operation (page 107).

Legend:

1) Card Cage Fan Assemb.y

Figure 7. Cleaning the Card Cage Fan Assembly

NOTE: Cabinet model shown.

Procedure is the same for

pedestal model.