Instruction manual

26
Chapter 2 Cleaning the Outside Surfaces
9. Using a cloth dampened (not wet) with alcohol, clean the ribbon guides.
10. Vacuum up dust and residue from the lower cabinet.
11. Wipe the interior of the lower cabinet with a clean, lint-free cloth
dampened with water and a mild detergent or window cleaning solution.
12. Dry the cabinet interior with a clean, lint-free cloth.
13. Clean the shuttle frame assembly, as described in the next section.
Legend:
1) Base Casting
2) Shuttle Cover Assembly
3) Splined Shaft
4) Tractors
5) Forms Thickness Lever
6) Ribbon Guide
Figure 5. Cleaning Inside the Cabinet or Top Cover
NOTE: Cabinet model
shown. Procedure is the
same for pedestal model.
1
2
3
4
5
6