Setup guide

3–35Configuring the Printer
Uppercase Select
The Uppercase Select parameter controls how the printer handles lowercase
characters it receives from the host computer.
• Upper & Lower: The printer prints lowercase characters received
from the host computer as lowercase, and uppercase
characters received from the computer as uppercase.
• Uppercase Only: The printer prints lowercase characters received
from the host computer as their corresponding
uppercase equivalents; uppercase characters received
from the computer are printed as uppercase.
NOTE: The Uppercase Select parameter is available only when the P-Series
XQ Printer Protocol has been selected.
Printer Select
The Printer Select parameter allows you to use control codes DC1 (on) and
DC3 (off) to cause the printer to interpret or ignore data sent from the host
computer.
• Disable: Turns off the Printer Select feature. DC1 and
DC3 control codes have no effect on the printer.
• On=DC1/Off=DC3: Turns on the Printer Select feature. When the
printer receives a DC3 control code from the
host computer, the printer discards all host data
following the DC3 until it receives a DC1
control code. When the printer receives a DC1
from the host, the printer processes all host data
following the DC1 until it receives a DC3.
NOTE: The Printer Select parameter is available only when the Serial
Matrix Printer Protocol has been selected.