Setup guide

Configuring the Printer3–32
Application Compatibility Menu Options
The Application Compatibility parameters, shown in Figure 3–8, control the
overall operation of the printer:
• Printer Protocol • 80–9F Hex.
• Buffer Size • Control Code 06
• Uppercase Select • Control Code 08
• Printer Select • Overstrike
• Paper Advance SW • Compress Print
• Power On State • Draft Print
• Alarm On Fault • Font Select / Elongated
• Shuttle Timeout • View
• Unidirectional • Display Language
• Select SFCC
For definitions of terminology used in this section, refer to the Glossary at
the end of this manual. For more detailed information, refer to the
Programmer’s Reference Manual.
NOTE: In the following descriptions, hexadecimal (hex) values are shown
for some ASCII codes, such as command delimiters. If you want to
verify that your host computer is sending the correct delimiters or
other codes to the printer, you can obtain a hex code printout and
look for the hex value of the delimiter in the printout. For details,
see “Printing Hex Code” on page 5–13.