Setup guide

3–23Configuring the Printer
Resetting the Printer to Default or Saved Parameters
Printer reset is also called initializing the printer. This procedure clears RAM
and loads either the factory configuration parameters or a set of parameters
you have saved previously.
Factory parameters are permanently stored in ROM. However, if you have
saved a set of configuration parameters, your most recently saved set loads
when you reset the printer.
NOTE: You can reset the printer any time the power is on: While it is
on-line, off-line, even while it is printing. However, to prevent
losing data, reset the printer only when it is off-line and the printer’s
internal input buffer does not contain data.
Step
Press Result Notes
1. Press:
ON LINE
Off–Line
Ready 1
Takes the printer off-line.
This step can be skipped,
but doing so might cause
loss of data.
2. Raise the printer cover.
IMPORTANT
In the next step, make sure you pr ess and r elease CLEAR and ENTER together .
If you hold down the CLEAR key after pr
essing both keys, NVRAM is erased
(including print statistics) and all printer parameters ar e r eset to the factory
defaults.
3.
CLEAR ENTER
+
Printer Reset
DIAGNOSTIC TEST
IN PROGRESS X
On–Line
(Current Font) 1
Press and release CLEAR
and ENTER
simultaneously.
4. Close the printer cover.