Setup guide

Configuring the Printer3–20
Step
Press Result Notes
1. Press:
ON LINE
Off–Line
Ready 1
The printer must be off-line
to load a configuration.
2. Raise the printer cover.
3.
+
ENTER Switch
Not Locked
Unlocking the ENTER key
allows you to load a
configuration.
4.
Ribbon Life
5.
UNTIL
Load Parameters
6.
Load Saved
Parameters 1
First of series.
7.
UNTIL
Load Factory
Parameters
Press the key until you reach
the appropriate parameter set
(IGP
, IBM 3287, IBM 5225,
or Factory).
8.
ENTER
Load Factory
Completed
Displays for about one
second (message varies,
depending on the parameter
set you are loading). The
printer loads the requested
parameters.
IMPORTANT
Factory parameters are loaded only into Configuration 1, not saved. If you turn
the printer off and then on, the saved Configuration 1 values will be restored.
9.
CLEAR
Off–Line
Ready 1