Setup guide

Configuring the Printer3–18
Step
Press Result Notes
1. Verify you have made all of the necessary changes to your current configuration. Return to the
top of the menu.
2.
Ribbon Life
3.
UNTIL
Save Parameters
X
X = the current
configuration.
4.
ENTER
Save Parameters
Values Saved
Displays for about one
second. The printer has
stored the new parameters
in NVRAM as power -up
default values.
5.
CLEAR
Off–Line
Ready X
X = the current
configuration.
6. To make a printout of your configuration, go to page 3–12, step 4. If you decide not to print the
configuration, then continue with the following steps.
7.
+
ENTER Switch
Locked
Prevents settings from
being changed.
8. Close the printer cover.
9.
ON LINE
On–Line
(Current Font) X
Places the printer on-line,
ready for normal operation.