Setup guide

Configuring the Printer3–14
Changing Configuration Values
Paper Format
Set at 6 LPI
Set at 8 LPI
Set at 10.3 LPI
Line Spacing Form Length Set Auto Line Feed
Application
Compatibility
A configuration consists of several parameters.
The printer contains four predefined configurations (IGP, IBM 3287, IBM
5225, and the factory default), which cannot be altered.
However, you can change the four customized configurations to meet
different print job requirements.
Changing the value of the Line Spacing parameter is provided as an example.
Use these basic guidelines to move throughout the configuration menu and
change other parameters. Page 3–6 shows the top level of the configuration
menu.
IMPORTANT
You can change the parameters at any time. However, if you intend to
SAVE the changes, be sure the current configuration is the one you want
to revise.
NOTE: You can press CLEAR at any time to return to off-line.