Setup guide

2–22 Setting Up the Printer
Test the Printer
Step Press Result Notes
1. The printer should be turned on and loaded with paper and ribbon. The top cover should be raised and
the control panel display should read “Off-Line Ready.”
2. Press:
+
ENTER Switch
Not Locked
Press both keys at the same time.
Unlocking the ENTER key
allows you to test your printer.
3.
Ribbon Life
4.
Diagnostics
5.
Configuration
Printout
6.
UNTIL
Printer Test
Full Width
OR
Printer Test
8 Inch Width
Press " until you reach the
appropriate test, for wide paper
(132 columns) or for narrow
paper (80 columns).
7.
Printer Test
Shift Recycle
8. To start the
test, press:
ENTER
Running Test
Shift Recycle
Prints shifted lines of the current
character set across the paper
(either 80 or 132 columns).