Setup guide

A–5Printer Specifications
Electrical Characteristics
Input Power
Voltage (RMS) 100 to 120 VAC or 200 to 240 VAC
Phase Single
Frequency 50 or 60 Hz
Max RMS Current 6 A at 100 V; 3 A at 200 V
Power Rating
Standby 160 Watts
Operating 400 Watts
Data Input Rate (maximum)
Dataproducts Up to 512,820 characters per second
Interface (max. specified)
Centronics Up to 222,222 characters per second
Interface (max. specified)
NOTE: Host computers that interrupt per character of parallel data
must complete the character transfer before enabling
interrupts; otherwise, stack overflow can occur.
RS-232 Up to 19.2K baud (2133 char/sec at the fastest
Interface possible rate, with 7 bits, one stop bit, no parity)
Radio Frequency Interference (RFI)
Radio Frequency Interference Tested/Certified to RFI Standards FCC 15
Class A; VDE 0871 Class B; CSA C108.8–M1983 Class A.