Setup guide

A–3Printer Specifications
Labels
On Backing One-part continuous perforated fanfold back form.
Labels must be placed at least 1/6 inch from the
fanfold perforation. Backing adhesive must not be
squeezed out during printing.
Sheet Size 3- to 16-inches (7.62 to 40.64 cm) wide, including
the two standard perforated tractor feed strips.
Maximum sheet size is 12 inches (30.48 cm)
between top and bottom perforations.
Thickness Not to exceed 0.025 inch (0.635 mm), including
backing sheet.
Printer Dimensions and Weight
Height 42.5 inches (108 cm)
Width 27 inches (68.6 cm)
Depth 28.7 inches (72.9 cm)
Weight Unpackaged: approximately 225 lbs. (102 kg)
Packaged: approximately 285 lbs (129 kg)