Setup guide

A–2 Printer Specifications
Ribbon Specifications
NOTE: Use only the ribbons listed below. Each kit contains six ribbons.
Extended Life Text Ribbon Kit P/N 107675–001
Bar Code Ribbon Kit P/N 107675–005
Paper Specifications
NOTE: The following are general paper specifications. Test paper stocks
with your applications before ordering large quantities.
Paper
Type Edge-perforated, fanfold, 3 to 16 inches wide
(7.62 to 40.64 cm),
1 to 12 inches long (2.54 to 30.48 cm)
Thickness Single-part: 15 to 100 pound stock (6.80 to 45.36 kg)
Multi-part: 1- to 6-part forms.
Maximum 12 lb. (5.44 kg) ply of upper plies
Form Thickness 0.025 inches maximum (0.635 mm)
Drive Adjustable tractors (6-pin engagement)
Slew Rate Slow Paper Slew Enabled:
15.8 inches/second maximum (40.1 cm/sec) for the
first 3.3 inches/second (8.38 cm/sec), then
8 inches/second (20.32 cm/sec) thereafter.
(Intentionally slowed to improve paper stacking.)
Slow Paper Slew Disabled:
15.8 inches/second maximum (40.1 cm/sec).