Setup guide

6–12 RibbonMinder
When Worn Action
This parameter allows you to choose what the printer will do when the
ribbon life reaches 0%. The following options are available:
• To Stop Printer (the default) causes the printer to stop printing at the
next top of page when Ribbon Life reaches 0%. Pressing ON LINE
allows the printer to print another page.
• Aud/Vis Alarm causes the printer beeper to sound and the control panel
status lamps to flash alternately when Ribbon Life reaches 0%. The
printer will not stop printing.
• Visual Alarm causes the control panel status lamps to flash alternately
when Ribbon Life reaches 0%. No audible alarm is sounded. The printer
will not stop printing.
The ribbon life will continue to decrease through negative values until –99%
is reached. It will remain at –99% until you change the ribbon.
In the following example, the When Worn Action parameter is changed from
stopping the printer to setting the visual alarm.
Step
Press Result Notes
1.
ON LINE
Off–Line xxx%
Ready 1
The printer must be off-line to
change the configuration.
2. Raise the printer cover.
3.
+
ENTER Switch
Not Locked
Press both keys at the same time.
Unlocking permits configuration
changes.
4.
Ribbon Life xxx%
5.
Ribbon Life xxx%
New Ribbon